How to avoid deformation of CNC aluminum parts

　　How to avoid deformation of CNC aluminum parts? What are the methods?

　　When machining CNC aluminum parts, if you want to avoid deformation, you must consider some methods. Only after mastering these methods can it be better processed.

　　Method 1: Symmetrical processing

　　When CNC aluminum parts are processed, symmetrical processing must be done. In this way, for those parts with relatively large machining allowances, in order to allow them to have better heat dissipation conditions during the processing, and to avoid heat concentration during processing. , To use this method for processing. If there is a 90 mm thick sheet that needs to be processed to 60 mm, then one side must be washed, and then the other side is processed immediately. Once processing to the final size, the flatness can reach about 5 mm, and it can be processed by repeatedly entering the symmetry method.

　　Method two: stratify multiple times

　　When CNC aluminum parts are processed, the processing method of multiple layers is also more important. If there are multiple different cavities on the plate parts, do not use the order of one cavity for processing. In this case, try to process all the cavities at the same time for each layer, and then process the next level.

　　What kind of methods are there when CNC aluminum parts are processed? Both of the above methods are more important, so I suggest you learn more about them before processing.