How to correctly use molds in aluminum die casting process

　　Although the aluminum die-casting process has the characteristics of convenient use and relatively high yield, many people often ignore the protection of the mold during the die-casting process, or do not know how to use the mold correctly. The following is the mold for the aluminum die-casting process. From the following points, we will introduce in detail.

　　1. Need timely and stable cooling

　　The mold of aluminum die-casting process needs to be cooled by a cold water system, which can not only extend its service life but also increase output. In actual operation, some operators have appeared in order to save trouble, and they do not connect the cold water pipe for cooling, and some even In order to save money, the company does not need cooling water for cooling when customizing the mold. Experts pointed out that even the best mold has a certain limit. If the temperature is too high, it may cause cracks in the film core or premature cracks. The final product is prone to deformation, mucous membrane, etc., and the production speed and quality of the product cannot be guaranteed.

　　2. It needs to be warmed up in time

　　The mold needs to be preheated before use to avoid cracks. At the same time, if the mold is equipped with neutron control, it must be ensured to avoid the signal line joint between the die casting machine and the mold.

　　The above are the issues that need to be paid attention to in the mold aspect of the aluminum die-casting process. If it is not handled well, the automatic shutdown will cause a delay in sales and production time, and it may cause signal disturbance, damage the mold, and cause unnecessary damage. Therefore, It is recommended that the operator must not save trouble when using it, and must operate step by step.If you want to purchase CNC Machining Parts products, you can contact Boyang Hardware Factory, thank you.